Sheet to Sheet Screen Printing Machine
Professional designer and manufacture of CCD machines for ONE STOP SOLUTION.
Language
Professional designer and manufacture of CCD machines for ONE STOP SOLUTION.
There is a waiting position in each feeding axis and pick-up axis, how to set this waiting position?
There is a waiting position in each feeding axis and pick-up axis, how to set this waiting position?
First of all, the waiting position of the take-off shaft, what is the role of the waiting position of the take-off shaft; that is, after the material is released, the front feeder shaft sends the material to the table, still printing operation, after the material of the take-off shaft has been put into the storage above; the take-off shaft will get a position close to the printing table, in order to save time, close to the table position to wait for the material to be released; you can adjust it properly, so that it is close to the table. But there is one thing to remember, the waiting position should not hit the table top and the stencil shelf. Set the appropriate distance and click OK, the waiting coordinates are generated.
What does the waiting position of the feeding axis mean?
That is, after taking the material and putting it on the table, when the machine is printing, the material taking axis has returned to the original position to take the material; after taking the material, it will wait there, then this waiting position can be the feeding position, or it can be slightly increased with the feeding position by a distance of 5-10 mm. For example, if 33 is set here, it can be set to about 40 here. Then there is a buffer position, the buffer position is to play what role? After the printing is finished, the stencil rises, and the feeding axis will take the printed material and put it on the conveyor belt, then the feeding axis robot will grab the material and send it to the table; during this period, while taking the material, you can also let it send the material at the same time, just so the two robots can't collide; then the feeding axis position setting is the same, the feeding axis position should also be set close to the stencil frame, but it must not exceed The position of feeding axis should also be set close to the screen frame, but must not exceed the screen frame area to let it collide. In other words, it can't exceed the material taking axis, because this is two robots operating at the same time, the material taking axis will come to get material, the material feeding axis will go to feed material; in order to save time will wait for it to buffer, so it must not exceed the material taking axis of that position; otherwise, the material feeding robot and the material taking robot will definitely collide, must keep the distance, about 20cm distance.
For example, the material pickup shaft will probably go to this position, usually set up words must pay attention to what position is appropriate, can not let them collide, almost the distance of 10-20 centimeters can be. Take the stencil just racked, for example, the material printing sheet in this position, sheet feeding, robot and material almost, almost 20 centimeters in between, just set the location of the buffer here. Now the coordinates of the buffer is generated, that now the robot set up is complete.
CONSULT OUR CUSTOMERS FOR SURPRISE DISCOUNTS
Please provide us with the information below to complete your request. Just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs!
VILITY is a Professional manufacturer, providing ONE-STOP SOLUTION for intelligent printing industry.
