Screen Printing Machine
Professional designer and manufacture of CCD machines for ONE STOP SOLUTION.
Language
Professional designer and manufacture of CCD machines for ONE STOP SOLUTION.
Next, there is a setting for the dust removal axis position next to the feeding axis setting.
Next, there is a setting for the dust removal axis position next to the feeding axis setting.
First, the time of dust removal, each printing needs to be a dust removal of the material, then set to 1.
The speed of dust removal, according to the demand, the speed can be fast or slow, the speed should not be too fast, about 400-500 on the line.
The times of the material is shaken, the material is shaken means that when the feed axis suction cups suck the material, in order to prevent two pieces of material because of electrostatic adsorption together, after sucking the material several times shaking; to ensure that each adsorption on the material is only one, so generally set three times to ensure that the material is sucked after shaking three times to prevent the material adsorption together; shake once the material will fall naturally, to prevent two pieces sheet from being sucked up.
How to set the dust removal position? The first step is to move the feedding robot to the discharge position. There is a dust removal roller on top of the loading robot, and the dust removal roller is used to clean the impurities on the material surface.
The distance from one end of the material to the other end of the material, this process is to set the dust removal length.
Dusting axis parameters adjustment, because it is the same axis operation, so click the left and right keys of the feeding axis to move the dusting roller; when the dusting roller is close to the right edge of the material, then you can set the start position of dusting, after determining the dusting coordinates are generated. Then continue to click the left button to move to the left, the feeding axis moves to the left, when the blue roller on the feeding axis is over the edge of the printed sheet, the dust removal action is finished, now set the dust removal end position, so that the dust removal end position is generated.
When the parameters are adjusted and the distance is found to be a little more or a little less in the actual production process, then there is a fine-tuning, +- symbol on this. When there is more, subtract a little, when there is less, add a little, to fine-tune the distance, according to the actual situation. If you say the distance is more or not enough, fine-tune it, after adjustment, for example, the position here is small add a little, and then dusting position settings click, select yes, you can, the coordinates are automatically generated, the above is the completion of the robot set steps.
CONSULT OUR CUSTOMERS FOR SURPRISE DISCOUNTS
Please provide us with the information below to complete your request. Just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs!
VILITY is a Professional manufacturer, providing ONE-STOP SOLUTION for intelligent printing industry.
