Vility Semi-automatic CCD vision alignment PCB drilling machine operating settings

This product is safe to use. It has passed various green chemical tests and Physical tests to eliminate Formaldehyde, Heavy metal, VOC, PAHs, etc.

FAQ

1.What certifications do you have?

We have CE,ISO90001 and other certifications.

2.What is the warranty period for your equipment?

We guarantee the whole machine for one year and provide life-long software upgrade service.

3.Do you provide installation and training services?

Yes, we will provide you with professional installation and training manuals and video tutorials. Live video conversations will also be provided to guide you through the operation.

Advantages

1.Accept OEM/ODM, screen printing industry whole line customization.

2.We provide a one-stop service integrating design, measurement, production, delivery, installation, and after-sales service.

3.We have 13 years of experience in product development and production. Professional engineer team can quickly design products according to your requirements.

4.We have always followed the standardization rules for a rigorous production process, saving time and cost for both parties and bringing maximum benefits to you.

About VILITY Semi-automatic CCD Vision Alignment PCB Drilling Machine Operating Settings

Turn on power switch then push PC button

machine is booting

put the sheet into the drilling area

the brightness is adjustable

Enter threshold

if it's not clear

Pull the bar to adjust the clearlity.

until the mark point is clear like this

click return,click study

inside the square there's a circle

Make sure the red circle is coincident with the mark

up and down button is resize the red circle.

the four arrows are to adjust the red circle position

after adjust well the position then click "save".

then click "autowork".

when it do not drill in the center of the target,

how to adjust it?

click four arrows to adjust the deviation.

light this hole is deviated to the button side.

we should adjust it towards top side

To which direction is divided,

we should adjust it towards the opposite

direction through the arrows.

if the hole is not drilled,

enter parameter

to modify the driltdis value.

The driltdis means the height of the drill.

The default value normallyr is 11.

if it's not drilled slightly increase the value,

the max value is about 19,

if the hole is not drilled too much,

can adjust the white ring on the drill.

if it's just a little, directly modify the driltdis valve.

then click "save".

how to process the center calibration?

Find a black suberstate,

put it into the drilling position,

click press

if the hole is reflective

pull the brightness bar to adjust

Or pull the contrast until the hole is clear

Click return

then click "study"

Adjust the red circle composition

make it or coincident with the hole,

please save

Then double click the left or corner,

come up a box then click left button.

Drill a hole then move material,

and will automatically drill the second hole.

the third fourth fifth hole

After during five holes, double click right top corner.

come up a box then click left button

Finally click "save" sinish calibration

how to change the drills?

push the cover plate

the cover plate goes up

Pull way the plate.

using size 12 and size ten wrench

Size 12 stuck the button and 10 stuck the top.

then twist the drill.

pull out the drill.

then change the drill.

twist it tight.

Made the plane align with the slot.

Push the plate button then planet goes down.

For opaque substrate,push up and down light.

the upper light is on,

First stopwork,

First check the threshold,

the mark is disappear here

then pull the thrustle bar to adjust

until see the mark.

then click return

Click study.

the red circle is adjustable.

the position is adjusted click safe

like this situation ,it don't drill,

Click "stopwork" to decrease the similarity.

if want to shut down the machine,

first exit the system.

Then click left button  select button  to shutdown the machine.

finally turn off the power switch.

CCD Automatic target hole drilling machine is also known as automatic target drilling machine, CNC drilling machine, automatic positioning drilling machine, different names, but actually the same kind of equipment .widely used in printing and packaging, electronic printing, nameplate signs and other industries post-printing alignment drilling!

The equipment is used in PCB circuit board, FPC soft board, IMD/IML, film, diazo sheet, cell phone panel, cell phone keypad, sticker, membrane switch, film, PE, PC, PVC, PET film, polyester film, thin aluminum, aluminum substrate, FR4 glass fiber board and many other materials. CCD automatic hole drilling machine is suitable for single and double panel, PCB multi-layer board, fiberglass, PVC panel, acrylic and other fragile plastic sheet positioning drilling.

 Auto hole drilling machine pictures 2

This equipment mainly includes hole drilling unit, equipped with CCD moving platform , high precision XYθ alignment platform, stable alignment, human-machine interface control + button switch, can set a variety of functional parameters, easy to operate; CCD automatic positioning punching, can automatically adjust the field of view of CCD according to the size of the material. CCD automatically calculates the spatial position of material and mold according to the MARK point on the material, and instructs the motor motion control to adjust the platform XYθ rotation for automatic hole drilling.

1. Alignment XYθ platform: Alignment XYθ platform is the core part of the machine, used for CCD vision alignment, this alignment platform is composed of XYθ4 axes, with alignment eccentricity function, alignment accuracy can be controlled within 0.02mm.

• Year Established
  --
• Business Type
  --
• Country / Region
  --
• Main Industry
  --
• Main Products
  --
• Enterprise Legal Person
  --
• Total Employees
  --
• Annual Output Value
  --
• Export Market
  --
• Cooperated Customers
  --